iPhone Is Disabled! Connect to iTunes, Tips to Fix It

How To Resolve iPhone Is Not Connected to iTunes? Yes, if you’re having issues with your iPhone and you are constantly receiving messages such as “iPhone is disabled. It must be quite infuriating to be told to “try again in 1 minute.” The iPhone’s connection to iTunes is disabled. That’s all we’re going to discuss in our thread right now.

If things go wrong, expect it, but don’t let it happen again. In this case, the errors may occur as a result of repeatedly entering the incorrect passcode, which will eventually result in your phone being locked. Alternatively, you may receive notifications about the disabled phone and are unsure how to resolve the issue.

This article will assist you in determining why your iPhone is disabled and how to resolve the issue. Have a quick read through each review section underneath and good luck.

You may have run out of reasons why your iPhone is disabled

There are several possible explanations for why your iPhone is disabled. The most common problem is entering the wrong passcode too frequently, which locks and disables your phone. That being said, the disabled iPhone could also be the result of the iPhone being locked down in order to protect against such a possible security breach.

In most cases, you will receive notifications regarding the disabled iPhone. They are as follows:

  • The iPhone has been disabled. Retry in 1 minute.
  • The iPhone has been disabled. Retry in 5 minutes.
  • The iPhone has been disabled. Retry in 15 minutes.
  • The iPhone has been disabled. Retry in 60 minutes.
  • The iPhone has been disabled. Connect your computer to iTunes.

If these notifications become more frequent, you must take action. Thus, communicating to iTunes appears to be the only option. Therefore, take a look at the following steps to assist you in reconnecting your disabled iPhone to iTunes.

How To Restore An iPhone That Has Been Disabled,  Connect to iTunes

The iPhone’s connection to iTunes is disabled. This is the point at which we will repair the disabled iPhone. Typically, when your iPhone is disabled, the message “connect to iTunes” appears. Connecting directly to the iPhone is possible, but you will lose all data during the recovery process. Of course, if you created a backup, you can restore the lost data from it. If not, why not? Consider how!

In this case, two stages must be followed: preparation and steps to repair your disabled iPhone.

Stage 1: Making plans
During this stage of preparation, you will require a computer to access to a Mac or a PC. Optionally, you could perhaps contact an Official Apple Store or a Mac reseller to borrow a machine. Additionally, you’ll need a lightning to USB cable to act as an adapter.

Stage 2: How to Repair a Disabled iPhone
There are several steps that can be taken to resolve an issue with your iPhone’s inability to connect to iTunes.

Switch to recovery mode
Entering recovery mode is the first step toward resolving your disabled iPhone. Due to the numerous editions of iTunes, the techniques used will also vary.

On the iPhone 8, you must hold down the “Side” button and one of the “Volume” buttons. Wait for the power-off slider to appear. Following that, drag the slider to turn off your iPhone and hold the “Side” side button while connecting your iPhone to your Mac via the cable. Hold it down until the recovery window opens.

On the iPhone 7, 7 Plus, and iPad touch, press and hold the “Side” button and wait for the slider’s power to activate. Connect the iPhone to your PC by turning it off. Later, press the “Volume” button till the recovery mode window opens.

On iPhone 6s and older, you can perform the same steps as described above.

On an iPad (Face ID), hold down the Top and Volume buttons simultaneously and wait till the power off slider appeared on the screen. While pressing the Top button, turn off your iPad and attach it to your Mac. Maintain pressure on the button until the recovery mode window opens.

On an iPad with the Home Button, hold down the Top button to bring up the power-off slider. To turn off the iPad, drag the slider across. Subsequently, attach the iPad to your Mac while simultaneously pressing the Home button. Continue pressing the button in this manner until the recovery mode window opens.

Using your Mac/PC, locate your iPhone

Indeed, locating an iPhone on a Mac is highly dependent on the software installed on your PC or Mac. As a result, download the Search tool or iTunes to assist you in locating your iPhone on your Mac or PC.

If you are using macOS Catalina in this case, open and tap on the Finder Window placed near just below the locations. Open iTunes if you’re running macOS Mojave. Given the various versions of iTunes, you will also follow the various steps.

  • In iTunes 12, click on the iPhone icon in the window’s upper-left corner.
  • In iTunes 11, click the iPhone tab on the right side of the window.
  • In iTunes 10, click the iPhone logo in the left-hand sidebar.

Select the restore option

After selecting your iPhone or iPad on the computer, click “Restore.” This is for the purpose of downloading the required software. This way, the process is completed in a matter of minutes. However, if the process takes longer than 15 minutes, it is recommended that you reconnect your device using the steps outlined above.

Once the download is complete, the onscreen prompts will appear. To begin, wait for your device’s data deletion process to complete.

Configure your iPhone

When everything is finished, you can configure your iPhone, which is now considered new. You have the option, and you can recover it from your backup. This is the final step when connecting your iPhone to iTunes is disabled.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top