Are you maximizing the efficiency of your air conditioning system? Consider the following tips and strategies for staying cool while conserving electricity and more.
The summer season that is hot is certainly the worst. And it’s much more frustrating whenever you turned to the air conditioning system for assistance only to discover that it’s not doing anything at all. Alternatively, you’re afraid that you might feel the impact on your monthly electric bill when it comes.
However, do not be concerned; we will guide you over several frequent air conditioners blunders that you may be committing at home. Correcting these faults can result in increased cooling efficiency, increased comfort, reduced energy spent, and a significantly lower electricity cost.
1. Making use of a small-sized of the air conditioner
It is the greatest error we can do before even turning on our air conditioning system.
Because all air conditioning window units were built to work with a specific amount of “airflow,” the unit will be ineffective when the room is either too large or just too tiny for AC to manage.
All air conditioning single pane windows do have Britain Heat Unit (BTU) value, which is commonly between 5,000 and 15,000. The general rule for every sq metre of floor space, 20 BTU is required, with an extra 600 BTU required for each people who occupy such space on a consistent basis. This amount might have to be increased by 10% if the space features high ceilings.
In addition, we don’t advise purchasing an Air conditioning system that is too large. While an oversized air conditioner will generate a lot of cool mist, and this would not end early enough as to dehumidify that house. Persistent dampness will give the space the appearance of being warmer or muggier than it actually appears.
2. Habit of Opening Your Doors and Windows
The following is a brief overview about how the air conditioning units operate: AC units draw hot air from a bedroom and dissipate it outside. The hot air is passed across a condenser, which removes heat from it; the cooled air can now be pushed back to the office or house, whereas the collected heat is vented out through the unit’s back.
That’s why window air conditioning units must be installed very near to the window or linked outside via the pipe; that is why major air conditioning systems are installed outside the room. For any air conditioner to function properly, the “inner air” and also the “outside air” must be separated. When the doors or windows remain open, any heat that escapes will be pumped back in.
Indeed, even without an air conditioner, you should avoid opening windows during the hottest part of the day.
3. Constantly Running the Air Conditioner
At 8 a.m., if you’re going to work, you’ll be back at 6 pm. Our ideal house temp is 72 degrees Fahrenheit. How much energy and money can you save by leaving your air conditioner running all day time and keeping the temperature at 72F? In this case, can you switch the device off before leaving and then ON the switch when you return?
While most people believe the first approach is superior, but the second approach actually requires less power. Savings are possible with the second idea.
You can save more energy by switching to this second strategy when it’s not hot weather.
4. Using a Low-Temperature Setting
The moment you walk through the door after a hard day’s work, you are hit with a wall of stuffy, 90-F of air rushing in. What are your responsibilities? You may think that the greatest action to take is to turn your air conditioner downward to 65 degrees Fahrenheit so as to force the area to cool quickly, but this is not how the cooling system operates.
When your room temperature is 70F or 90F, the same “volume” of moist air is pumped out by your Ac system. The degree setting just indicates when the machine should quit blowing in the cool air; altering it from 70F -65F will not accelerate the process. This is the absolute worst thing anyone could do in this position. That’s because the air conditioning machine will continue to operate once it hits your perfect temperature.
Example: If your optimal conditions is 72 degrees Fahrenheit, and you configure the unit to 65 degrees Fahrenheit, the device will run till the area temp drops 65 degrees Fahrenheit. You’re suddenly too cool, and you’ve squandered a bunch of energy in the process.
The instruction: set your air conditioning unit to your right temp and leave it alone.
5. Leaving doors and air conditioning vents open
It is necessary to go over a bunch of different possibilities here.
How do you recall that the window frames are created with a specific airflow gap?
A bedroom may be 150 sq ft, although if you keep your door open when the ac is running, you’ve added a significant amount of passage for the cool air to flow to wrong place.
The cooling will exit, and the hot air will enter. This is how it works. This means that your air conditioning machine is going to cool both inside and outside your room, which may be a volume that it is not designed to handle.
Closed the door that has the running AC in order to minimize energy and save the unit.
This will help to speed up the cooling process by limiting the volume of air that needs to be handled in the room for cooling.
If You Really Have a Centralized Air Conditioning Unit
Almost every room in your house is likely equipped with an air conditioning vent. When all of your valves are opened, the central unit will attempt to chill all of those rooms at the same time.
When there is a large amount of airflow to be cooled, then cooling process takes longer. Furthermore, your AC will have to run for a longer period of time, resulting in wasted energy and increased utility costs.
It is possible to reduce cooling requirements by cutting rooms off from the central unit and blocking the flow of air into those rooms. The air will cool down more quickly in rooms with open vents. Keeping the entrances to these rooms locked is also necessary for the same reasons that we discussed before in this article.
6. Failure to replace the air conditioning filter
However clean the room, particles are continually swirling along with the air and are drawn into the air conditioning machine when it is operating at its maximum capacity. Particle filters are used in all air conditioning machines to avoid these particles from having issues with the machine.
A hygienic filter is important for maximum air conditioning performance. Airflow is reduced as a result of particle building, which compels the device to work harder by drawing in the same quantity of air as it did initially.
In the worst-case scenario, a clogged filtration system can raise your energy bills by 15% because using the AC for long time without maintaining the filter can be another problem.
If an air conditioner runs continuously throughout the day, you must replace the filtration system at least once every month. If you do not use it frequently, you can replace the filtration system every 3 months. Certain window units include washable filters; alternatively, you’ll need to purchase spare part filters as needed.
7. Using a Fan to Circulate Air
The majority of people make use of a fan whenever it’s warm and changes to the air conditioner whenever it’s hot. However, fans and air conditioners must not be viewed as mutually exclusive. Indeed, air conditioners perform far faster when combined with fans (particularly automatic ceiling fans).
Whenever cool air is poured, it collects with window air conditioners, which means that the area is directly in front of the unit and it has to be the most comfortable. The cooler parts of central units are directly near the vents.
You’ll have had to rely on heat transfer to keep the other portion of your house cool naturally. However, this is frequently a painfully long process; to accelerate the process, you may use a fan to drive the cool air to flow throughout the room.
Consider adding a drop of purple food colouring to a glass of chilled water. If you continue watching it sink before mixing, it may take a little time for the particles to evaporate, attaining equilibrium and evenly dispersing across the water. The same concept applies in this instance.
Moreover, circulated air aids in the evaporation of sweat, which has a cooling impact on the skin. This implies you can really turn up the temperature on your air conditioner while maintaining the same level of comfort, saving you money on hot weather.
8. Postponing AC servicing
The benefits of routine maintenance go beyond simply extending the life of the device. By doing routine maintenance, you can ensure that your equipment runs at peak performance for the duration of its useful life, resulting in faster and more effective cooling while using less power.
If you notice or hear something unusual, such as grinding or fluid leakage, have it checked out as soon as possible. The same goes if anything smells bad.
In most cases, it’s best to be prepared than sorry, and catching an issues quickly is frequently less expensive than replacing the complete air conditioning machine whenever it fails. If you cannot afford a yearly checkup for your air conditioner, avoid delaying when anything eventually goes wrong.
9. Ignoring Cleaning Between Seasons
It’s not uncommon to see an AC unit that is constantly dripping. When an air conditioner is used frequently, moisture on the interior can cause havoc. Nevertheless, well-designed air conditioning units have mechanisms in place to eliminate moisture before it becomes an issue.
Condensation typically drains and flows itself out, so we didn’t have to think about it. When something bad happens and condensation accumulates, mould and germs may begin to form within.
Due to the fact that air conditioning units work by pumping cool air into the bedroom, all the little critters can hitch a trip and colonize other areas. This may result in health problems such as pneumonia, asthma, black mold contamination, or Legionnaire’s illness.
It is critical to maintain and service the air conditioning devices prior to the beginning of each cooling season. Don’t let anything filthy to stay in your house for free.